Previously, I introduced you to the relevant knowledge of ribbons through the Yantai computer consumables manufacturer. Today we will continue to enter the world of ribbons. The editor will tell you how to install the ribbons of Yantai computer consumables
Take them out from the printer The ribbon rack is ready for new ribbon cores.
Remove the print head ribbon fixing clip. First remove the plastic cover on top and then take the ribbon out of the gap as shown in the picture.
Gently pull the plastic buckles around and in the middle of the ribbon holder outward to remove the upper cover.
Take out the old ribbon inside. Before taking it out, pay attention to the position of the ribbon at both ends for reference when loading new ribbon.
Open the new ribbon core and find the loose ribbon segments.
Buckle the ribbon core into the ribbon holder.
The ribbon on the side of the wheel should follow the red line in the picture, and be careful to keep it parallel to the ribbon inside.
The ribbons at the circle on the right end of the ribbon rack should be kept parallel and consistent.
Fasten the ribbon rack cover and fasten the buckle tightly.
Turn the knob on the ribbon holder to confirm whether the ribbon moves smoothly.
Install the ribbon fixing clip and put on the plastic cover. Be careful not to install the ribbon rack upside down so that the protruding part of the ribbon card is on one side.
Turn off the power of the printer, install the ribbon holder, and turn the knob to confirm that the ribbon moves smoothly.
Slowly pull the print head back and forth several times in the direction of movement to confirm that the ribbon can move normally, then open the printer and load paper for testing.
After understanding the installation method of Yantai computer consumables ribbons, you will definitely have a certain understanding of its installation process. If you want to learn more about Yantai computer consumables, please pay attention to our website!
Tell you how to install the ribbon for Yantai computer consumables